Your dashboard services.
Register to access all tools.

Zestaw DEHNcon-H

The separation distance to electrical and metal systems under the roof has to be maintained according to the state of engineering and lightning protection standard IEC/EN 62305-3, if bare, uninsulated air-termination conductors are installed on the roof. In many cases there are cables, pipes and metal structures underneath the roofing and thus too close to the air-termination system/down conductors. This problem can be solved by an isolated air-termination system with high-voltage-resistant down conductors.

– New type of isolated air-termination system for transmitters/receivers (satellite dish, terrestrial antenna) or whole buildings or parts of a building
– Optically appealing due to the HVI light Conductor being installed inside of the supporting tube, reduced size of the supporting tubes (Al pipe 40x5 mm) and lower total weight, also suitable for subsequent mounting at antenna poles
– Interior sealing end with a flexible StSt strip carried out at the bottom of the supporting tube for connection to the equipotential bonding
– High-voltage-resistant, insulated down conductor for keeping the separation distance from electrically conductive parts according to IEC/EN 62305-3
– Equivalent separation distance s ≤ 45 cm (in air), s ≤ 90 cm (solid building material)
– Supporting tube with insulating section of glass-fibre reinforced plastic (GRP) tube Ø30 mm
– Material factor km = 0.7
– Light grey colour, UV stabilised

HVI light conductor meets the requirements of EN 62561-2.

Szczegóły

Detail – supporting tube with installed conductor.
lorem ipsum

Przewód HVI light wewnątrz rury wsporczej z iglicą odgromową

With interior sealing end and air-termination rod StSt Ø10 mm.

5 Produkty

Nr kat. 819255 HVI LI 20 L6M SR1990 FSP500 GFK AL V2A

GTIN / EAN 4013364255371, Nr taryfy celnej: 85389099, Waga brutto: 6.84 kg, Jednostka opakowaniowa: 1.00 szt.

Wcześniejszy produkt

Rysunki

Informacje dodatkowe

DEHNcon-H HVI®light Conductor in supporting tube 1990 mm with air-termination rod 500 mm
DEHNcon-H isolated air-termination system e.g. of transmitting/receiving systems
(parabolic, terrestrial antennas).
Visually pleasing design since the HVI®light Conductor is installed inside the supporting tube
High-voltage-resistant insulated down conductor allows to keep the separation distance from electrically conductive parts according to IEC/EN 62305-3
Equivalent separation distance s =< 45 cm (in air)
or s =< 90 cm (solid material).
The supporting tubes are dimensioned according to Eurocode.
HVI®light Conductor installed in the supporting tube, with special integrated sealing end and air-termination tip Ø10 mm, 500 mm long.
Materiał rury wsporczej: GRP / Al
Długość rury wsporczej: 1990 mm
Średnica przewodu Ø: 20 mm
Kolor przewodu: grey ●
Materiał przewodu: Cu
Równoważny odstęp separujący s (w powietrzu): ≤ 45 cm
Minimalna długość do zamówienia: 6 m
Maksymalne obciążenie wiatrem: 240 km/h
Maksymalna długość swobodna: 1890 mm
Minimalna długość zaciskania: 600 mm
<TRANSLATION_PLACEHOLDER>: <TRANSLATION_PLACEHOLDER> <TRANSLATION_PLACEHOLDER>

Producent: DEHN
Typ: HVI LI 20 L6M SR1990 FSP500 GFK AL V2A
Nr kat.: 819255
lub podobny.

Certyfikaty

 

Dane techniczne

Materiał rury wsporczej GRP / Al
Długość rury wsporczej 1990 mm
Długość iglicy odgromowej 500 mm
Materiał przewodu Cu
Równoważny odstęp separujący s (w powietrzu) ≤ 45 cm
Minimalna długość do zamówienia 6 m
Maksymalne obciążenie wiatrem 240 km/h
Maksymalna długość swobodna 1890 mm
Minimalna długość zaciskania 600 mm
<TRANSLATION_PLACEHOLDER> (<TRANSLATION_PLACEHOLDER>) <TRANSLATION_PLACEHOLDER> <TRANSLATION_PLACEHOLDER>

Produkt 819255 został dodany do notatnika.

Do koszyka dodano produkt 819255.

Nr kat. 819256 HVI LI 20 L6M SR1990 FSP1000 GFK AL V2A

GTIN / EAN 4013364255388, Nr taryfy celnej: 85389099, Waga brutto: 7.14 kg, Jednostka opakowaniowa: 1.00 szt.

Wcześniejszy produkt

Rysunki

Informacje dodatkowe

DEHNcon-H HVI®light Conductor in supporting tube 1990 mm with air-termination rod 1000 mm
DEHNcon-H isolated air-termination system e.g. of transmitting/receiving systems
(parabolic, terrestrial antennas).
Visually pleasing design since the HVI®light Conductor is installed inside the supporting tube
High-voltage-resistant insulated down conductor allows to keep the separation distance from electrically conductive parts according to IEC/EN 62305-3
Equivalent separation distance s =< 45 cm (in air)
or s =< 90 cm (solid material).
The supporting tubes are dimensioned according to Eurocode.
HVI®light Conductor installed in the supporting tube, with special integrated sealing end and air-termination tip Ø10 mm, 1000 mm long.
Materiał rury wsporczej: GRP / Al
Długość rury wsporczej: 1990 mm
Średnica przewodu Ø: 20 mm
Kolor przewodu: grey ●
Materiał przewodu: Cu
Równoważny odstęp separujący s (w powietrzu): ≤ 45 cm
Minimalna długość do zamówienia: 6 m
Maksymalne obciążenie wiatrem: 200 km/h
Maksymalna długość swobodna: 2390 mm
Minimalna długość zaciskania: 600 mm
<TRANSLATION_PLACEHOLDER>: <TRANSLATION_PLACEHOLDER> <TRANSLATION_PLACEHOLDER>

Producent: DEHN
Typ: HVI LI 20 L6M SR1990 FSP1000 GFK AL V2A
Nr kat.: 819256
lub podobny.

Certyfikaty

 

Dane techniczne

Materiał rury wsporczej GRP / Al
Długość rury wsporczej 1990 mm
Długość iglicy odgromowej 1000 mm
Materiał przewodu Cu
Równoważny odstęp separujący s (w powietrzu) ≤ 45 cm
Minimalna długość do zamówienia 6 m
Maksymalne obciążenie wiatrem 200 km/h
Maksymalna długość swobodna 2390 mm
Minimalna długość zaciskania 600 mm
<TRANSLATION_PLACEHOLDER> (<TRANSLATION_PLACEHOLDER>) <TRANSLATION_PLACEHOLDER> <TRANSLATION_PLACEHOLDER>

Produkt 819256 został dodany do notatnika.

Do koszyka dodano produkt 819256.

Nr kat. 819257 HVI LI 20 L6M SR2640 FSP500 GFK AL V2A

GTIN / EAN 4013364255395, Nr taryfy celnej: 85389099, Waga brutto: 7.79 kg, Jednostka opakowaniowa: 1.00 szt.

Wcześniejszy produkt

Rysunki

Informacje dodatkowe

DEHNcon-H HVI®light inside the supporting tube, 2640 mm, air-termination rod 500 mm
DEHNcon-H isolated air-termination system e.g. of transmitting/receiving systems
(parabolic, terrestrial antennas).
Visually pleasing design since the HVI®light Conductor is installed inside the supporting tube
High-voltage-resistant insulated down conductor allows to keep the separation distance from electrically conductive parts according to IEC/EN 62305-3
Equivalent separation distance s =< 45 cm (in air)
or s =< 90 cm (solid material).
The supporting tubes are dimensioned according to Eurocode.
HVI®light Conductor installed in the supporting tube, with special integrated sealing end and air-termination tip Ø10 mm, 500 mm long.
Materiał rury wsporczej: GRP / Al
Długość rury wsporczej: 2640 mm
Średnica przewodu Ø: 20 mm
Kolor przewodu: grey ●
Materiał przewodu: Cu
Równoważny odstęp separujący s (w powietrzu): ≤ 45 cm
Minimalna długość do zamówienia: 6 m
Maksymalne obciążenie wiatrem: 240 km/h
Maksymalna długość swobodna: 2540 mm
Minimalna długość zaciskania: 600 mm
<TRANSLATION_PLACEHOLDER>: <TRANSLATION_PLACEHOLDER> <TRANSLATION_PLACEHOLDER>

Producent: DEHN
Typ: HVI LI 20 L6M SR2640 FSP500 GFK AL V2A
Nr kat.: 819257
lub podobny.

Certyfikaty

 

Dane techniczne

Materiał rury wsporczej GRP / Al
Długość rury wsporczej 2640 mm
Długość iglicy odgromowej 500 mm
Materiał przewodu Cu
Równoważny odstęp separujący s (w powietrzu) ≤ 45 cm
Minimalna długość do zamówienia 6 m
Maksymalne obciążenie wiatrem 240 km/h
Maksymalna długość swobodna 2540 mm
Minimalna długość zaciskania 600 mm
<TRANSLATION_PLACEHOLDER> (<TRANSLATION_PLACEHOLDER>) <TRANSLATION_PLACEHOLDER> <TRANSLATION_PLACEHOLDER>

Produkt 819257 został dodany do notatnika.

Do koszyka dodano produkt 819257.

Nr kat. 819258 HVI LI 20 L6M SR2640 FSP1000 GFK AL V2A

GTIN / EAN 4013364255418, Nr taryfy celnej: 85389099, Waga brutto: 8.09 kg, Jednostka opakowaniowa: 1.00 szt.

Wcześniejszy produkt

Rysunki

Informacje dodatkowe

DEHNcon-H HVI®light Conductor in supporting tube 2640 mm with air-termation rod 1000 mm
DEHNcon-H isolated air-termination system e.g. of transmitting/receiving systems
(parabolic, terrestrial antennas).
Visually pleasing design since the HVI®light Conductor is installed inside the supporting tube
High-voltage-resistant insulated down conductor allows to keep the separation distance from electrically conductive parts according to IEC/EN 62305-3
Equivalent separation distance s =< 45 cm (in air)
or s =< 90 cm (solid material).
The supporting tubes are dimensioned according to Eurocode.
HVI®light Conductor installed in the supporting tube, with special integrated sealing end and air-termination tip Ø10 mm, 1000 mm long.
Materiał rury wsporczej: GRP / Al
Długość rury wsporczej: 2640 mm
Średnica przewodu Ø: 20 mm
Kolor przewodu: grey ●
Materiał przewodu: Cu
Równoważny odstęp separujący s (w powietrzu): ≤ 45 cm
Minimalna długość do zamówienia: 6 m
Maksymalne obciążenie wiatrem: 201 km/h
Maksymalna długość swobodna: 3040 mm
Minimalna długość zaciskania: 600 mm
<TRANSLATION_PLACEHOLDER>: <TRANSLATION_PLACEHOLDER> <TRANSLATION_PLACEHOLDER>

Producent: DEHN
Typ: HVI LI 20 L6M SR2640 FSP1000 GFK AL V2A
Nr kat.: 819258
lub podobny.

Certyfikaty

 

Dane techniczne

Materiał rury wsporczej GRP / Al
Długość rury wsporczej 2640 mm
Długość iglicy odgromowej 1000 mm
Materiał przewodu Cu
Równoważny odstęp separujący s (w powietrzu) ≤ 45 cm
Minimalna długość do zamówienia 6 m
Maksymalne obciążenie wiatrem 201 km/h
Maksymalna długość swobodna 3040 mm
Minimalna długość zaciskania 600 mm
<TRANSLATION_PLACEHOLDER> (<TRANSLATION_PLACEHOLDER>) <TRANSLATION_PLACEHOLDER> <TRANSLATION_PLACEHOLDER>

Produkt 819258 został dodany do notatnika.

Do koszyka dodano produkt 819258.

Nr kat. 819259 HVI LI 20 L7.5M SR5040 FSP500 GFK AL V2A

GTIN / EAN 4013364256088, Nr taryfy celnej: 85389099, Waga brutto: 12.20 kg, Jednostka opakowaniowa: 1.00 szt.


Rysunki

Informacje dodatkowe

DEHNcon-H HVI®light Conductor in supporting tube 5040 mm with air-termination rod 500 mm
DEHNcon-H isolated air-termination system e.g. of transmitting/receiving systems
(parabolic, terrestrial antennas).
Visually pleasing design since the HVI®light Conductor is installed inside the supporting tube
High-voltage-resistant insulated down conductor allows to keep the separation distance from electrically conductive parts according to IEC/EN 62305-3
Equivalent separation distance s =< 45 cm (in air)
or s =< 90 cm (solid material).
The supporting tubes are dimensioned according to Eurocode.
HVI®light Conductor installed in the supporting tube, with special integrated sealing end and air-termination tip Ø10 mm, 500 mm long.
Materiał rury wsporczej: GRP / Al
Długość rury wsporczej: 5040 mm
Średnica przewodu Ø: 20 mm
Kolor przewodu: grey ●
Materiał przewodu: Cu
Równoważny odstęp separujący s (w powietrzu): ≤ 45 cm
Minimalna długość do zamówienia: 7.5 m
Maksymalne obciążenie wiatrem: 149 km/h
Maksymalna długość swobodna: 4940 mm
Minimalna długość zaciskania: 600 mm
<TRANSLATION_PLACEHOLDER>: <TRANSLATION_PLACEHOLDER> <TRANSLATION_PLACEHOLDER>

Producent: DEHN
Typ: HVI LI 20 L7.5M SR5040 FSP500 GFK AL V2A
Nr kat.: 819259
lub podobny.

 

Dane techniczne

Materiał rury wsporczej GRP / Al
Długość rury wsporczej 5040 mm
Długość iglicy odgromowej 500 mm
Materiał przewodu Cu
Równoważny odstęp separujący s (w powietrzu) ≤ 45 cm
Minimalna długość do zamówienia 7.5 m
Maksymalne obciążenie wiatrem 149 km/h
Maksymalna długość swobodna 4940 mm
Minimalna długość zaciskania 600 mm
<TRANSLATION_PLACEHOLDER> (<TRANSLATION_PLACEHOLDER>) <TRANSLATION_PLACEHOLDER> <TRANSLATION_PLACEHOLDER>

Produkt 819259 został dodany do notatnika.

Do koszyka dodano produkt 819259.


Powrót na górę